You’ve finally decided that a mini-split system is the best way to heat and cool your home.

Congratulations! Not only is the installation process less invasive than a more traditional HVAC system, but it’s also energy-efficient and cost-effective.

Once you’ve made this decision, it’s time to turn your attention to the installation process.

You have two basic options available to you:

Steps to Install a Ductless Mini-Split System

In its most basic form, there are three steps to install a ductless mini-split system:

While that sounds simple enough, there’s a lot more that goes into the process. Let’s take a look at some of the other things required to ensure proper installation and performance:

1. Installing the Mounting Brackets

For every indoor air handler, you must install a bracket to the wall. This includes leveling it, marking the screw hole locations, and marking hole locations for the electrical cable, condensate discharge line, and refrigeration lines.

And that’s just the planning process.

From there, you need to bore the holes in the appropriate location and attach the mounting bracket to the wall.

2. Running the Lines

Ductless mini-split systems require a condensate discharge line and refrigeration lines. Without these, your system won’t work. The same holds true if you neglect to install the lines in the appropriate manner.

After the indoor air handlers are mounted on the bracket, you’ll feed the lines through the hole in the wall and down a vertical chase on the exterior of your home. The lines will lead to the outdoor unit, which isn’t always located in an easily accessible area.

3. Running the Electrical Cable

Mini-split systems need electricity to work, so you need to run a conduit from the condenser unit to an outdoor electrical box.

Challenges may include:

It goes without saying that you don’t want to make a mistake here, as it could result in your system not working, and even worse, a fire.

Along with the above, the final steps include pressure testing the system and vacuuming out the nitrogen. These aren’t steps that the average homeowner is able to complete without a professional.

There’s a lot to keep in mind when installing a ductless mini-split system.

If you’ve come to the conclusion that a DIY installation is out of the question, contact us to discuss your situation and schedule a consultation. As one of the leading installers of ductless mini-splits in the Boston area, we’re available to meet your every need.

Skip to content